MONACOR LARGE BLACK 4 x SPEAKER SPIKES
Black Burnished Monacor Speaker Spikes. (Part No. SPS-65/SW) [12.9160]
You are purchasing 1 packs of 4 spikes ( enough for 1 Loudspeaker or 1 separates ) - 4 Spikes in total.
Ideal for heavier speakers.
YOU WILL NEED TO ORDER 2 SETS FOR 2 SPEAKERS
Spikes are 54mm long including 29mm of thread which also takes the locking nut. The threads are 3/8" UNC (Unified Coarse)
The spikes screw into the 25mm deep screw-In inserts which require an 13mm hole to be drilled into the base of the speaker if your speakers don't already have them.
A 10mm hexagon key is required for mounting.
The purpose of spikes is to mechanically couple the speakers to the floor. This coupling is essential in achieving the best sonic performance and will dramatically improve clarity, stereo imaging and also tighten up the bass response.
The spikes should fully pierce the carpet, coming into solid contact with the solid floor below.
Adjust the spikes so that each makes secure contact with the floor without the speaker wobbling in any direction when rocked.